Huawei DR814Q User Manual
Page 83
User Manual
Aolynk DR814Q ADSL2+ Broadband Router
5 Advanced Configuration
78
To add a community, refer to the following information to perform the settings, and then
click <Add>.
z
community: Type in the community name, uniquely identifying an SNMP
community. The packets mismatching the community name are discarded.
z
WriteEnable: Specify the access right for the community. If Read-Only is selected,
this community can only view the DR814Q information; if Read-Write is selected,
this community can view or modify the DR814Q information.
z
ServIP: Specify the IP address of the management site sending SNMP packets. It
is recommended that you keep the default setting 0.0.0.0, which indicates the
source IP address sending the SNMP packets is not restricted.
To delete the current community, click the corresponding <Delete>.