Huawei DR814Q - Manual (Page 19)

User Manual
Aolynk DR814Q ADSL2+ Broadband Router
4 Web-based Basic Configuration
14
To create a DHCP/Static IP WAN connection, select the DHCP/StaticIP option from the
ATM mode list (see Figure 4-4), and then click <Configure> to enter the page (see
Figure 4-5).
Figure 4-5 DHCP/Static IP
Table 4-1 Description of the DHCP/Static IP items
Item Description
Description Type in the distinctive description on this service.
VPI Type in the VPI value provided by your ISP.
VCI Type in the VCI value provided by your ISP.
Encapsulation
method
Select the packet encapsulation method according to your
ISP, LLC/SNAP or VcMux, from the drop-down lastly/SNAP
is usually selected.
Obtain an IP Address
Automatically Select this option to obtain an IP address from your ISP’s
DHCP server automatically.
Use the following IP
Address
Select this option if you have the static IP address provided
by your ISP. You need also provide the IP address and
subnet mask.
WAN IP Address Type in the static IP address provided by your ISP.
Subnet Mask Type in the subnet mask provided by your ISP.
Enable NAT on this
interface
Select this check box to enable NAT. With it, SOHO users
can make multiple hosts access network via a public IP
address.
Click <Apply> after the configuration is complete.