Huawei DR814Q - Manual (Page 92)

User Manual
Aolynk DR814Q ADSL2+ Broadband Router
7 Appendix - TCP/IP Protocol
87
7.2 Configuring TCP/IP
7.2.1 Specifying to Obtain an IP Address Automatically
If you are running Windows 98/ME/NT, refer to those described in section Figure 7-3 to
specify to obtain an IP address automatically. If you are running Windows 2000/XP,
perform the following operation.
1) Choose [Start/Settings/Control Panel] to open the [Control Panel] dialog box.
Double-click the Network Connection icon to open the [Network Connection]
dialog box and then double-click the Local Connection icon to open the [Local
Area Connection Status] dialog box (see Figure 7-5).
Figure 7-5 Local Area Connection Status dialog box
2) Click <Properties> to open the [Local Area Connection Properties] dialog box (see
Figure 7-6). Select the [General] tab and select Internet Protocol (TCP/IP) in the
[This connection uses the following items:] section, and then click <Properties> to
open the [Internet Protocol (TCP/IP) Properties] dialog box as shown in Figure
7-7.