Huawei DR814Q - Manual (Page 35)

User Manual
Aolynk DR814Q ADSL2+ Broadband Router
4 Web-based Basic Configuration
30
Figure 4-24 Set a DHCP server
To modify the IP address of the DHCP server in the list, modify it directly in the field and
then click <Apply>.
To delete the existing DHCP server, select the corresponding [Delete?] check box and
then click <Apply>.
III. Enable/disable DHCP relay
You need to enable the DHCP relay function after the configuration is complete. The
functions of DHCP server and DHCP relay of the DR814Q cannot be enabled
concurrently. By default, you cannot enable the DHCP relay because the DHCP server
is already enabled. The prompt is display as shown in Figure 4-21.
Click <DHCP Server> on the above page (see Figure 4-24) to enter the DHCP server
page, click <Disable> and thus <Enable> appears on the page (see Figure 4-25). If the
DHCP relay is disabled currently, you can click <Enable> to enable it. Conversely, click
<Disable> to disable it.
Figure 4-25 Enable/disable the DHCP relay