Zipb, 2 zipb – Huawei DR814Q User Manual
Page 81
User Manual
Aolynk DR814Q ADSL2+ Broadband Router
5 Advanced Configuration
76
5.5.2 ZIPB
ZZIPB (zero installation PPP bridge) can ensure that a SOHO user can obtain a public
IP address through the router, and to resolve the problem that all SOHO routers with
NAT enabled cause part of the application unable to function normally.
Figure 5-41 ZIPB configuration
This page allows you to:
z
Enable/disable the ZIPB mode
z
Specify the ZIPB host
z
Perform advanced ZIPB configuration.
If the ZIPB is currently disabled, click <Enable> to enable it. If enabled, click <Disable>
to disable it.
Select the PC that will use the public IP address in the current LAN from the drop-down
list, and then click <Apply>.
To perform advanced ZIPB configuration, follow these steps:
z
Select the LAN interface on which ZIPB will run from the [LAN interface]
drop-down list.
z
Select the WAN interface on which ZIPB will run from the [WAN interface]
drop-down list.
Click <OK> after the ZIPB configuration is complete.