Huawei DR814Q - Manual (Page 23)

User Manual
Aolynk DR814Q ADSL2+ Broadband Router
4 Web-based Basic Configuration
18
Caution:
Do not set the same VPI and VCI values for all services.
As shown in Figure 4-9, the service set up successfully will be added into the WAN
service list.
Figure 4-9 WAN service list
II. Edit a WAN service
To modify a service or perform advanced configuration, click the corresponding
<Edit…> to enter the page. If necessary, modify the related values and then click
<Change>.For details of the ATM Channel parameter configuration, refer to section 5.1
II. “QoS configuration”.
III. Delete a WAN service
To delete an existing WAN service, click the corresponding <Delete…> button to enter
the page, and then click <Delete this connection>.