Huawei DR814Q - Manual (Page 89)

User Manual
Aolynk DR814Q ADSL2+ Broadband Router
7 Appendix - TCP/IP Protocol
84
7
Appendix - TCP/IP Protocol
7.1 Inst
he PC through which you configure your DR814Q must have the TCP/IP installed. If
you are not sure whether TCP/IP is installed, follow these steps.
alling TCP/IP
T
Caution:
By default, TCP/IP is installed on Windows 2000/XP. The following steps are described
r the Windows 98/ME/NT. fo
Choose [Start/Settings/Control Panel]. 1)
3)
the TCP/IP and the name of the NIC you are currently using exists. If not, click
<Add> to open the [Select Network Component Type] dialog box (see Figure 7-1).
2) Double-click the Network Connection icon to open the [Network] dialog box and
select the [Configuration] tab (see Figure 7-1).
Check the list on the [Configuration] tab page to see if the item that contains both