Huawei DR814Q User Manual

Page 85

Advertising
background image

User Manual
Aolynk DR814Q ADSL2+ Broadband Router

6 Troubleshooting

80

Caution:

Resetting the DR814Q removes all the customized settings and restores the default

ones.

Symptom 5: Fail to access the Web configuration page.

Solution: Follow the procedures to check whether:

1)

The version of the Internet Explorer is Microsoft Internet Explorer 5.5 or Netscape

6.0 or later.

2)

PC and the DR814Q are in the same network segment.

3) Use

the

ping command in an MS-DOS window to check the network connectivity:

z

Ping 127.0.0.1 to see if the TCP/IP protocol is installed.

z

Ping 192.168.1.1 (the default IP address of the gateway) to check for the

connection between the PC and DR814Q in the LAN.

4) If the physical connections are normal, but you still cannot access the Web

configuration pages of the DR814Q, make sure the proxy server and the dialup

connection are disabled.

Symptom 6: Fail to access the Internet with your PC.

Solution: Follow the procedure:

5) Check whether the ADSL2+ Link LED is solid ON. If not, check the ADSL line

connection.

6)

Check whether the IP address is obtained and you can ping the IP address of the

DR814Q’s LAN port if you configure the PC to obtain the IP addresses of the host

and the DNS server automatically (recommended). Refer to section 6.2.1 “Ping”

for instructions on how to use the ping utility. If you cannot ping the port, check if

the Ethernet cable is correct.

7) When the current PC is specified with a private IP address, make sure that: The

PC resides in the same segment as that of the DR814Q’s LAN port. The IP

address of the gateway is specified as that of the DDR814Q’s LAN port. The IP

address of the DNS is specified as that of the DR814Q’s LAN port or the DNS

Server the ISP allocates. The host is able to ping the IP address of the DR814Q’s

LAN port.

8)

When the host can communicate with the DR814Q normally, but cannot connect

to the Internet, log into the [Status] page of the DR814Q (refer to section 4.5

“Status”) first, and check to see if the WAN port of the DR814Q has obtained the

Internet IP address and if the default route exists.

Symptom 7: You cannot access the Web pages through the PC in the LAN.

Solution: Follow the procedure to check:

Advertising