Huawei DR814Q - Manual (Page 22)

User Manual
Aolynk DR814Q ADSL2+ Broadband Router
4 Web-based Basic Configuration
17
Figure 4-8 PPPoE
Table 4-4 Description of PPPoE items
Item Description
Description Type in the distinctive description on this service.
VPI Type in the VPI value provided by your ISP.
VCI Type in the VCI value provided by your ISP.
User name Type in the user name provided by your ISP.
Password Type in the password provided by your ISP.
Auto Connect
If this check box is selected, the device automatically
performs the dialup connection again in response to a LAN
access request when the network is disconnected.
User Idle Timeout
Type in the auto-disconnect idle time. Network connection is
disconnected automatically in the case of no data
transmission within the set time. This is suitable for
time-based network accounting. If the time is set to 0, it
indicates that the connection is never disconnected.
Enable NAT on this
interface
Select this check box to enable NAT. With it, SOHO users
can make multiple hosts access network via a public IP
address.
Click <Configure> after the configuration is complete.