Huawei DR814Q User Manual
Page 94
User Manual
Aolynk DR814Q ADSL2+ Broadband Router
7 Appendix - TCP/IP Protocol
89
the LAN. But in some cases you still need to configure network settings for some or
even all the PCs on a network.
By default, the IP address of the Ethernet port of DR814Q is 192.168.1.1. Choose any
from 192.168.1.2 to 192.168.1.254 to make your PC in the same segment with
192.168.1.1/24. Follow the procedure suitable for your operating system to specify IP
addresses.
1)
Specify the IP address of your PC.
z
Windows 98/ME/NT: In the [TCP/IP Properties] dialog box (see Figure 7-4), select
the [IP Address] tab and select the Specify an IP address option.
z
Windows 2000/XP: In the [Internet Protocol (TCP/IP) Properties] dialog box (see
Figure 7-7) select the [General] tab, and then the Use the following IP address
option. Type in the IP address and subnet mask in the corresponding fields and
click <OK>.
2)
Specify the IP address of the gateway.
z
Windows 98/ME/NT: In the [TCP/IP Properties] dialog box (see Figure 7-4) select
the [Gateway] tab. Type in the default IP address of your DR814Q (192.168.1.1) in
the [New gateway] text box and click <Add>.
z
Windows 2000/XP: In the [Internet Protocol (TCP/IP) Properties] dialog box (see
Figure 7-7), select the [General] tab. Type in the default IP address of your
DR814Q (192.168.1.1) in the [Default gateway] text box and click <OK>.
3)
Specify the IP address of the DNS server.
z
Windows 98/ME/NT: In the [TCP/IP Properties] dialog box (see Figure 7-4), select
the [DNS configuration] tab and type in the default IP address of your DR814Q
(192.168.1.1) as the DNS server IP address in the corresponding field.
z
Windows 2000/XP: In the [Internet Protocol (TCP/IP) Properties] dialog box (see
Figure 7-7) click <Advanced…> to open the [Advanced TCP/IP Configuration]
dialog box. Select the [DNS] tab and click <Add…>. Type in the default IP address
of the DR814Q (192.168.1.1) in the [DNS server] field and click <Add>.
4)
Making the settings take effect.
z
Windows 98/ME/NT: Click <OK> and restart your PC for the above settings to take
effect.
z
Windows 2000/XP: Click <OK> to make the above settings to take effect.