Huawei DR814Q - Manual (Page 29)

User Manual
Aolynk DR814Q ADSL2+ Broadband Router
4 Web-based Basic Configuration
24
Figure 4-16 LAN connections
I. Set a LAN port
To change the IP address of the LAN port, type in the IP address and/or subnet mask
directly in the corresponding field, and then click <Apply>.For related introduction to the
IP address, refer to section 9 “Appendix - IP Address and Subnet Mask”
To perform advanced configuration on the attribute of LAN port, click <Advanced…> to
enter the [Edit iplan] page as shown in Figure 4-17.If necessary, modify the values of
options and click <Change>.