Huawei DR814Q User Manual
Page 77
User Manual
Aolynk DR814Q ADSL2+ Broadband Router
5 Advanced Configuration
72
z
Delete an existing route
This page also allows you to view the following information about existing routes:
z
Whether the route is valid
or invalid
z
Destination IP address (Destination)
z
Gateway address (Gateway)
z
Network mask (Netmask)
z
Whether the route is advertised via RIP (true or false)
To change the destination address, gateway address, netmask and advertise status of
a route, change the settings in the relevant text boxes, and then click <Apply>.
To modify the cost or interface settings for the route, click <Advanced Options…> to
enter the [Advanced Settings] page. Change the related value, and then click <OK>.
Figure 5-36 Advanced Settings page
To delete an existing route, select the corresponding [Delete?] check box in Figure 5-35
and click <Apply>.
To add a new route, click <Create new Ip V4Route…> in Figure 5-35 to enter the [IP
V4Route] page. Type in the related values of route options, and then click <OK>.Click
<Cancel> to cancel the settings and return to the route configuration page.