HP QMS 1660E - Manual (Page 131)

PS Protocol
Option
5-33 Additional Technical Information
Options
The following options are available in the PS Protocol menu.
Menu Administration/Communications/ Interface /PS Protocol
Choices Name and Description
Normal—Enables standard, ASCII hex
protocol. Data is sent and received in
ASCII format. This mode is recommended
if you do not print binary data. It was
designed for data in the printable ASCII
range. Print jobs can alter the PS protocol
value through PostScript operators.
Normal Fixed—Enables standard, ASCII hex
protocol. Print jobs cannot alter this value
through PostScript operators.
Binary—Enables binary communications
protocol. Print jobs can alter this value
through PostScript operators. Data in the
printable ASCII range also prints)
Binary Fixed—Enables binary communications
protocol. Print jobs can not alter this value
through PostScript operators. Data in the
printable ASCII range also prints.
QBinary (Quoted Binary)—Enables binary
communications protocol. Print jobs can
alter this value through PostScript
operators. Data in the printable ASCII
range also prints. Use the special quoting
mechanism for the special characters and
^D (EOF).
QBinary (Quoted Binary) Fixed—Enables
binary communications protocol. Print jobs
cannot alter this value through PostScript
operators. Data in the printable ASCII
range also prints. Use the special quoting
mechanism for the special characters and
^D (EOF).
Interfaces
Parallel, serial,
Ethernet, Token-
Ring, LocalTalk
Parallel, serial,
Ethernet, Token-
Ring, LocalTalk
Parallel, serial,
Ethernet, Token-
Ring, LocalTalk
Parallel, serial,
Ethernet, Token-
Ring, LocalTalk
Ethernet, Token-
Ring, LocalTalk
Ethernet, Token-
Ring, LocalTalk