HP QMS 1660E - Manual (Page 177)

Optional
Interfaces
6-43 Printer Options
Using a CrownNet Network Interface
Once a CrownNet network interface is installed, refer to the following
for more information:
n Chapter 4, “Printer Configuration,” of this manual contains
information about the PS Protocol option in the new optional
network interface menu that appears in the Administration/
Communications menu. Chapter 5, “Additional Technical
Information,” contains a full discussion of PS Protocol.
n
The documentation that comes with the CrownNet network inter-
face contains information about all other options in the new
CrownNet menu as well as instructions for connecting the printer
to the network and for printing over the network.
n Your application and network documentation contain information
on printing over the network.
Using a LocalTalk Interface
Once a LocalTalk interface is installed, three steps are required to
connect to the LocalTalk port: assembling the proper interface cabling
(use a LocalTalk-type kit such as Farallon's PhoneNET, available from
your QMS vendor), making the connection, and making sure the
necessary printing files are installed on the Macintosh.