HP QMS 1660E - Manual (Page 145)

Media Input
Options
6-11 Printer Options
7 Lock together the paper feeder and the cassette supporter.
Stand the paper feeder and the cassette supporter on their ends.
Then, using your thumb, push the lock buttons on the bottom left
and right sides of the cassette supporter until you hear a click.
8 Attach the paper feeder to the printer.
See the “Installing the Paper Feeder” section earlier in this chap-
ter for instructions.
Removing the Cassette Supporter
If you find it necessary to remove the cassette supporter from the
printer, use the following procedure (referring to the illustrations in the
previous section, if necessary):
1 Turn off the printer, and disconnect the power cord and all
interface cables.
2 Remove the paper cassettes from the printer.
3 Remove the paper feeder from the printer.
Follow the steps in the “Removing the Paper Feeder” section ear-
lier in this chapter.
Lock