HP QMS 1660E - Manual (Page 207)

Kanji Option
Kit
6-73 Printer Options
The emulation is ready to be used.
Kanji Option Kit
The QMS Kanji Option Kit contains a pre-formatted IDE hard disk that
contains Kanji fonts and other files. The Kanji fonts include Ryumin
Light-KL and Gothic BBB-Medium (licensed to QMS by Morisawa and
Company, Ltd.) as well as Mincho Medium, Mincho Heavy, Gothic
Bold, and Gothic Heavy (licensed to QMS by TypeBank). These fonts
can be printed at a variety of point sizes and in different styles and
resolutions.
Three steps are involved in setting up and using the Kanji fonts:
n
Install an optional IDE-SCSI board (if necessary) and the Kanji
internal IDE hard disk
n
Configure the printer for Kanji
n
Access the Kanji fonts
Once you have performed these three steps, the six Kanji fonts are
available for use just as if they were resident in the printer.
» Note: Before beginning this procedure, have available the QMS
Crown Kanji Option Installation Instructions , included in the Kanji
Option Kit.
Installing the IDE-SCSI Board and the Kanji
Internal IDE Hard Disk
Use the instructions in the previous section, “Storage Options,” to
install the IDE-SCSI board and the Kanji internal IDE hard disk.
Keep the following considerations in mind:
n Ensure that your printer is already installed, configured, and
tested for proper operation before installing the Kanji hard disk.