Installing a simm – HP QMS 1660E User Manual
Page 160
Single In-Line
Memory
Modules
QMS 1660E Print System Reference
6-26
Additional printer memory (RAM) allows you to download more fonts
and increase the printer's buffer (area where data sent from the com-
puter is stored while it’s waiting to be printed).
Installing a SIMM
M
WARNING!
Turn off the printer and unplug the power cord before
taking the cover off the printer.
ACHTUNG!
Bitte schalten Sie den Drucker aus und ziehen Sie den
Netzstecker heraus bevor Sie die Druckerabdeckung öffnen.
▲
Caution
: It's very important to protect the printer controller board and
SIMMs from electrostatic damage while performing this task. Review
the anti-static guidelines in the “Removing the Printer and Controller
Board Covers” section, earlier in this chapter. Handle SIMMs
carefully, preferably only by the edges.
SIMMs are installed as follows:
1
Access the printer controller board.
Use the instructions in the “Removing Printer and Controller
Board Covers” section of this chapter.
2
Position the controller board so the interface panel is on your
right.
3
Remove the SIMM from the anti-static bag.