HP QMS 1660E - Manual (Page 164)

Intellifont SIMM
QMS 1660E Print System Reference 6-30
5 If necessary, refer to “Installing a SIMM,” earlier in this section.
6 Replace the printer and controller board covers.
Use the instructions in the “Replacing the Printer and Controller
Board Covers” section of this chapter.
Intellifont SIMM
An optional Intellifont SIMM increases the number of fonts available
to the HP PCL 5 emulation on your printer from 20 to the 37 PCL 5
fonts available on a Hewlett-Packard LaserJet 4Si.
Installing the Intellifont SIMM
M WARNING! Turn off the printer and unplug the power cord before
taking the cover off the printer.
ACHTUNG! Bitte schalten Sie den Drucker aus und ziehen Sie den
Netzstecker heraus bevor Sie die Druckerabdeckung öffnen.
▲ Caution: It's very important to protect the printer controller board and
SIMMs from electrostatic damage while performing this task. Review
the anti-static guidelines in the “Removing the Printer and Controller
Board Covers” section, earlier in this chapter. Handle SIMMs
carefully, preferably only by the edges.
1 Access the printer controller board.
Use the instructions in the “Removing Printer and Controller
Board Covers” section of this chapter.
2 Position the controller board so the interface panel is on your
right.
3 Remove the SIMM from the anti-static bag.