HP QMS 1660E - Manual (Page 34)

Introduction
QMS 1660E Print System Reference 4-2
Introduction
This chapter begins by listing and describing the different ways you
can configure your printer to meet your special printing needs.
The next section describes how to use the printer control panel to
access the configuration menu and how to make configuration
changes.
The rest of the chapter provides basic printer configuration informa-
tion about all configuration menu options. The
QMS CrownNet Inter-
face System Administrator’s Guide (shipped with your printer)
contains complete Administration/Communications/Network2/Crown-
Net menu configuration information for the Ethernet interface.
Menu options discussed in this chapter are grouped according to
task. After each option is introduced, a table lists the option’s location
in the configuration menu, the available choices for that option, and
the factory default (the value set at the factory).
Methods of Configuration
You have four major ways to configure your printer to meet your print-
ing needs. In order of priority, they are
n Through an application
n Through PS Executive Series Utilities
n Through printer commands
n
Through the printer control panel
n
Through a remote console (for network users)
Using an Application
Using your application is the best way to control your printer since
most printing is done on a per-job basis. This helps prevent confusion
in network environments and saves you from making changes at the