HP QMS 1660E - Manual (Page 254)

Updated DOC
Commands
QMS 1660E Print System Reference C-8
Updated PCL 5 DOC Commands
Disable Scalable Fonts Command
Install Object Command
Syntax %%IncludeFeature:scalablefonts( value )
Purpose Enables/disables PCL 5 scalable fonts
Variable value
Purpose Specifies whether to disable scalable fonts.
Range 0—Enables scalable fonts
1—Disables scalable fonts
Default 0
Notes Disable scalable fonts to
n Print PCL 4 documents which inadvertently select PCL 5
scalable fonts.
n More closely emulate the PCL 4 font environment.
Syntax %%IncludeFeature:install( resource id object id )
Purpose Establishes the current resource and the default object ID value
for the current job to which it is attached. If it is attached to a job
that downloads a font without setting the current object ID using
the PCL escape sequence <ESC>(#X, it has the appearance of
“storing” the font on disk.
Variables resource id
Purpose Identifies one of the possible locations for
downloaded objects
Range 0 to 6
Default Internal system disk
Format Integer
Notes If no %%IncludeFeature:install DOC command is
sent, the internal default location is used; otherwise,
this parameter, which must be provided, specifies
one of the alternate locations. For most QMS
printers, resource 6 is the system disk.