HP QMS 1660E - Manual (Page 62)

Hard Disks
QMS 1660E Print System Reference 4-30
Installing an Optional Font
Use the Administration/Disk Operations/Install Option menu to add
optional fonts to the hard disk from a font card. This selection copies
data from the card to the hard disk. See chapter 6, “Printer Options,”
for instructions.
» Note: If an error message displays in the message window during
this operation, press the Menu key to remove the message and
restart the operation from the beginning.
▲ Caution: Before you install any optional fonts, ensure that the printer
has enough memory, or they may not all be available for use. If it
doesn’t, you can install SIMMs (see chapter 6, “Printer Options”) to
increase printer memory, or you can install a hard disk (see chapter 6,
“Printer Options”) and enable disk swapping (Administration/Memory/
Enable Disk Swap menu–see the “Memory” section, later in this
chapter).
Removing an Optional Font
Use the Administration/Disk Operations/Remove Option menu to
remove a previously installed optional font. See chapter 6, “Printer
Options,” for instructions.
» Note: If an error message displays in the message window during
this operation, press the Menu key to remove the message and
restart the operation from the beginning.