HP QMS 1660E User Manual
Page 156
Advertising
Removing the
Printer and
Controller
Board Covers
QMS 1660E Print System Reference
6-22
2
Using both hands, open the multipurpose tray.
3
Open the print-
er's front cover.
Push up on the
release button,
located on the
top-right front of
the printer.
4
Remove and set
aside the two
screws, one on
each end of the
front inside of
the printer.
5
Remove the
printer’s cover.
a
Using both
hands, lift the
printer’s
cover.
b
Hold the
cover with
your right
hand while
you unplug
the connector
cable from the
printer.
c
Remove the
cover and set
it aside.
onnector Cable
Advertising