HP 958-000290-000 - Manual (Page 141)

edge switch 2/32 installation guide Index–3
Index
Installation Options 2–3
Installation Task Summary (table) 2–1
installation tasks
backing-up configuration data 2–51
cabling Fibre Channel ports 2–69
configuring
network addresses 2–6
product manager application 2–23
switch from EWS 2–51
switch to the HAFM Application 2–13
configuring OSMS or FICON management
server 2–19
configuring the feature key 2–15
connecting switch to fabric director 2–69
LAN-connecting the switch 2–11
recording and verifying HAFM Server
restoration information 2–13
setting switch date and time 2–21
setting up the HAFM server 2–12
summary 2–1
testing remote notification 2–50
unpacking, inspecting, and installing
Ethernet hub 2–71
switch 2–4
verify installation requirements 2–3
verifying switch-to-HAFM server
communication 2–14
interop mode 2–32
IP address
configuring 2–6
default B–1
default value B–2
L
LAN
connector 1–8
LAN, connecting the switch 2–11
laser
devices A–6
information A–9
LEDs
fan 1–9
FRU status 1–9
port SFPs 1–9
power supply 1–9
PWR LED 1–9
LIN alerts, default values B–2
logs, introduction 1–3
M
MAC address, default B–2
MAC addresses 2–6
maintenance port 1–3 , 1–9
management
switch 1–5
management server, default values B–3
mode
interop 2–32
open fabric 1.0 2–32
open systems 2–29
operating 2–28
S/390 2–28
multiswitch fabric 1–5
e_d_tov 2–31
principal switch 2–31
rerouting delay 2–27
N
network addresses, configuring 2–6
network information, configuring from EWS
2–62
notebook PC 1–10
NV-RAM 2–25 , 2–29
O
open fabric 1.0 2–32
open systems mode 2–28 , 2–29
operating mode 2–28
operating parameters, default values B–2
P
password, default B–1
PCMCIA slots 1–11
personal computer, HAFM server 1–10
port addresses, default value B–2