HP 958-000290-000 - Manual (Page 45)

edge switch 2/32 installation guide 2-19
Installing and Configuring the Edge Switch 2/32
Figure 2–14: Activate FMS feature key
Task 10: Configure OSMS or FICON Management Server
(Optional)
Perform this task to configure the open systems management server or FICON
management server. Only one management server can be configured at a time.
Configure OSMS
Perform this procedure to configure the open systems management server and enable
OSI host control of the switch. Implementing host control requires installation of a
SAN management application on the OSI server. Management applications include
Veritas SANPoint Control (Version 1.0 or later), or Tivoli NetView (Version 6.0 or
later).
To configure the open systems management server:
1. At the Hardware View page for the selected switch, choose Configure >
Management Server. The Configure Open Systems Management Server
dialog box displays, as shown in
Figure 2–15 .
Figure 2–15: Configure Open Systems Management server dialog box