HP 958-000290-000 - Manual (Page 143)

edge switch 2/32 installation guide Index–5
Index
operating mode 2–28
preferred domain ID 2–27
rerouting delay 2–27
switch priority 2–31
related number codes 2–32
switch priority setting 2–32
switches, principal, determining 2–31
symbols on equipment xi
T
Task 1, Verify Installation Requirements 2–3
Task 10, Configure Feature Key (Optional) 2–15
Task 11, Configure OSMS or FICON
Management Server (Optional) 2–19
Task 12, Set Switch Date and Time 2–21
Task 13, Configure the edge 2/32 product
manager application 2–23
Task 14, Test Remote Notification (Optional)
2–50
Task 15, Back Up Configuration Data 2–51
Task 16, Configure the Switch from the Web
Server (Optional) 2–51
Task 17, Cable Fibre Channel Ports 2–69
Task 18, Connect Switch to a Fabric Director
(Optional) 2–69
Task 2, Unpack, Inspect, and Install the Ethernet
Hub (Optional) 2–71
Task 3, Unpack, Inspect, and Install the Switch
2–4
Task 4, Configure Network Addresses (Optional)
2–6
Task 5, LAN-Connect the Switch 2–11
Task 6, HAFM server (Optional) 2–12
Task 7, Configure the Switch to the HAFM
Application 2–13
Task 8, Record HAFM Server Restore
Information 2–13
Task 9, Verify Switch-to-HAFM Server
Communication 2–14
technical specifications, power requirements B–4
technical support, Compaq xiii
trap recipient IP addresses, default value B–3
U
UDP port, default value B–3
user rights, configuring, EWS 2–67
W
warning
rack stability xii
websites
Compaq storage xiii
WWN
principal switch 2–31
WWN binding 2–35
Z
zone members, default value B–3
zone set state, default value B–3
zone set, description of 1–5
zone sets, default value B–3
zone states, default value B–3
zones, number of, default value B–3
zoning, default values B–3