HP 958-000290-000 - Manual (Page 37)

edge switch 2/32 installation guide 2-11
Installing and Configuring the Edge Switch 2/32
11. Choose Exit from the File menu to close the HyperTerminal application. A
message box displays, as shown in Figure 2–5 .
Figure 2–5: Disconnect Now dialog box
12. Click Yes. A message box displays, as shown in Figure 2–6 .
Figure 2–6: Save Session dialog box
13. Click No to exit and close the HyperTerminal application.
14. Power off the maintenance terminal:
a. Choose Start > Shut Down. The Shut Down Windows dialog box displays.
b. At the Shut Down Windows dialog box, choose Shut down the Computer
and click Yes to power off the PC.
15. Disconnect the RS-232 null modem cable from the switch and the maintenance
terminal. Replace the protective plate over the maintenance port.
Task 4: LAN-Connect the Switch
Connect the switch to the customer-supplied Ethernet LAN segment or the
HP-supplied Ethernet hub.
To connect the desktop or rack-mounted switch to the Ethernet LAN segment:
1. Connect one end of the Ethernet patch cable (supplied with the switch) to the
RJ-45 connector (labeled 10/100) on the left front of the chassis.