Configure user rights, Configure user rights –67 – HP 958-000290-000 User Manual
Page 93
edge switch 2/32 installation guide
2-67
Installing and Configuring the Edge Switch 2/32
3. Click Activate to save the information. The message
Your changes to the
SNMP configuration have been successfully activated
displays.
Configure User Rights
Perform this procedure to configure the administrator-level and operator-level
passwords used to access the Embedded Web Server interface through the Username
and Password Required dialog box.
To configure passwords:
1. At the Configure window, click the User Rights tab. The User Rights page
displays.
2. For the Administrator set of data fields:
a.
Type the administrator user name (as specified by the customer’s network
administrator) in the New User Name field. Use 16 alphanumeric characters
or less.
b.
Type the administrator password (as specified by the customer’s network
administrator) in the New Password field. Use 16 alphanumeric characters or
less.