HP 958-000290-000 - Manual (Page 47)

edge switch 2/32 installation guide 2-21
Installing and Configuring the Edge Switch 2/32
• Active = Saved—when this option is enabled, the active configuration of
logical port addresses is used when the IPL configuration file is updated. If a
check mark displays, the Active = Saved option is enabled.
3. Select the appropriate country code page from the following Code Page list box,
as shown in Table 2–3 .
4. Click Activate to enable changes and allow or prohibit FICON host control.
Task 11: Set Switch Date and Time
The Edge Switch 2/32 Product Manager log entries are stamped with the date and time
received from the switch. To set the effective date and time for the switch:
1. At the Hardware View page for the selected switch, choose Configure >
Date/Time. The Configure Date and Time dialog box displays, as shown in
Figure 2–17 .
The switch date and time can be set manually, or set to be periodically updated by
the HAFM application (the switch and HAFM application synchronize at least
once daily).
Table 2–3: Code Page Choices
Code Page Name
Code
Page
United
States/Canada 00037
Germany/Austria 00273
Brazil 00275
Italy 00280
Japan 00281
Spain/Latin
America 00284
United Kingdom 00285
France 00297
International #5 00500