HP 958-000290-000 - Manual (Page 73)

edge switch 2/32 installation guide 2-47
Installing and Configuring the Edge Switch 2/32
11. Click Next. A final screen displays to provide a summary of your alert
configuration. To make any changes, backwards and forwards through the
configuration screens by selecting Previous and Next, as shown in
Figure 2–33 .
Figure 2–33: New Threshold Alerts dialog box—summary screen
12. Select Finish. The Configure Threshold Alerts dialog box displays listing the
name, type, and state of the alert that you just configured.
At this point, the alert is not active. To activate the alert, select the alert
information that displays in the Configure Threshold Alerts table and select
Activate, as shown in
Figure 2–34 .