HP 958-000290-000 - Manual (Page 83)

edge switch 2/32 installation guide 2-57
Installing and Configuring the Edge Switch 2/32
Configure Date and Time
Perform this procedure to configure the effective date and time for the switch. To set
the date and time:
1. At the Configure window, click the Switch tab, then select Date/Time tab. The
Switch page displays with Date/Time tab selected (highlighted red), as shown in
Figure 2–41 .
Figure 2–41: Switch page—Date/Time tab
a. Click the Date fields that require change, and type numbers in the following
ranges:
Month (MM): 1 through 12
Day (DD): 1 through 31
Year (YY): greater than 1980
b. Click the Time fields that require change, and type numbers in the following
ranges:
Hour (HH): 0 through 23
Minute (MM): 0 through 59
Second (SS): 0 through 59
2. Click Activate to save the information. The message Your changes to the
date/time configuration have been successfully
activated displays.