HP 958-000290-000 - Manual (Page 48)

2-22 edge switch 2/32 installation guide
Installing and Configuring the Edge Switch 2/32
Figure 2–17: Configure Date and Time dialog box
Set Date and Time Manually
To set the switch date and time manually:
1. At the Configure Date and Time dialog box, click Periodic Date/Time
Synchronization to deselect the option (no check mark in the box). The greyed
out Date and Time fields activate.
2. Click the Date fields that require change, and type numbers in the following
ranges:
Month (MM): 1 through 12
Day (DD): 1 through 31
Year (YY): greater than 1980
3. Click the Time fields that require change, and type numbers in the following
ranges:
Hour (HH): 0 through 23
Minute (MM): 0 through 59
Second (SS): 0 through 59
4. Click Activate to set the switch date and time and close the Configure Date and
Time dialog box.