HP 750 User Manual
Page 211
C4705-90000
10-13
Product History and Service Notes
Solution to Problem 1: AVION" Ć Backtension
Replace the small spring of the rollĆfeed by a new one that applies the correct force (spring
included in the kit).
Procedure
1 Remove the center window ' page 6Ć14.
2 Remove the right endĆcover ' page 6Ć17.
3 Use a pair ofpliers to remove the small spring from the rollfeed module
4 Install the new spring.
Solution to Problem 2: Rollcover screws / spindle interaction
Replace the screws with flatĆhead ones so that they do not interfere with the spindle or the
spindle spacer.
Procedure
1 Open the rollfeed cover.
2 Identify the three screws (at each side) that hold the cover with the hinge.
3 Replace the screw that is in the lowest position (only one per side).
Administrative Information
Classification:
Modification Recommended
Standards:
0.5 Hour Labor
Action Category:
On Failure
Location Category:
OnĆSite
Service Inventory:
N/A
Used Parts:
N/A
HP Responsible Until: 1 Feb 1998
Author Entity:
EV/F900