HP 750 User Manual
Page 85
Advertising
1 Remove the window ' page 6Ć13.
2 Remove the right endcover ' page 6Ć17.
3 Remove the YĆaxis motor holder ' page 6Ć32.
4 Holding the cutter wheels in towards the center of the cutter carriage assembly, move the
cutter assembly to the right and remove it from the front slider bar.
5 Slowly release the wheels to relax the spring tension on the wheel arms and lift the cutter
assembly clear of the plotter.
Reassembling: Ensure that the cutter is over the overdrive blade.
6-33
Removal and Replacement
C4705-90000
Removing the Cutter
Advertising