HP 750 - Manual (Page 34)

3-12 Installation and Configuration C4705-90000
Configuring the Plotter/Printer
(Instructions ' User's Guide, chapter 7)
The User's Guide describes how to:
D Print out a current configuration sheet (an example is given on the following page).
D Change the frontĆpanel settings.
D Change the graphicsĆlanguage settings.
D Change the interface settings.
D Upgrade the plotter with more memory (not applicable to the DesignJet 755CM).
VerifyingPlotter Operation
The plotters contain several types of internal operational checks and tests to ensure that the
plotter is properly functioningand to help identify problems if any are detected.
PowerĆOn SelfĆTests
Whenever you switch the plotter on, it automatically performs a series of internal selfĆtests
and mechanical initialization sequences. If a failure occurs, an error is indicated on the
frontĆpanel display. You can perform a failure analysis by readingthe error codes/messages.
(Details ' chapter 8.)
Demonstration Plot
You can check proper plotter operation by plottingand examiningthe demonstration plot,
which is resident in the plotters. This plot shows different plotter capabilities includingpen
line widths and shading. You can set the demonstration plot, to plot in any of the languages
listed in the
Language
box on the frontĆpanel display.
(Instructions ' User's Guide, chapter 1, w Change the language,
' User's Guide, chapter 1, w Send a sample plot or demonstration plot.)