Document Outline

• Table of Contents
• Introduction
• Precautions
• Main Features of D-160
• Names and Functions
  • Front panel
  • Detachable Controller
  • Rear Panel
  • Display Section
• Before Operating the D-160
  • 1. Hard disk recording method and the REMAIN display
  • 2. Audio file and Event
  • 3. Program Change function
  • 4. Real track and additional track
  • 5. Input monitor and Repro monitor
  • 6. Time Base
  • 7. Installing and formatting a hard disk
  • 8. Extending the detachable controller
• Recording / Playback
  • 1. Basic connections
  • 2. Default setting on the D-160
    • 2-1. Setting a Program
    • 2-2. Program Change
    • 2-3. Deleting a Program
    • 2-4. Setting a Sampling Rate
  • 3. Analog Recording and Playback
    • 3-1. Basic recording and playback
    • 3-2. Recording with the Program Change function
    • 3-3. Playback using the Vari-pitch function
    • 3-4. Multitrack recording using overdubbing
    • 3-5. Mixdown
    • 3-6. Ping-pong recording
  • 4. Digital Recording
    • 4-1. Digital recording from an external digital device
    • 4-2. Digital recording to an external digital device
    • 4-3. Connecting a digital mixer
• Locate Function
  • 1. Storing memory data
  • 2. Locate
  • 3. Auto Play mode
  • 4. Auto Return mode
  • 4. Auto Repeat mode
• Punch In/Out
  • 1. Auto Punch In/Out
    • 1-1. Storing the Punch In/Punch Out point
    • 1-2. Auto Punch In/Out Rehearsal mode
    • 1-3. Auto Punch In/Out Take mode
    • 1-4. Undo/Redo of Auto Punch In/Out
  • 2. Punch In/Out Recording using a foot switch
    • 2-1. Punch In/Out Rehearsal
    • 2-2. Punch In/Out Take
    • 2-3. Undo/Redo of Manual Punch In/Out
• Edit Function
  • 1. Copy & Paste
    • 1-1. Copying
    • 1-2. Copy & Pasting
    • 1-3. Copy & Paste Undo/Redo
  • 2. Move & Paste
    • 2-1. Moving
    • 2-2. Move & Pasting
    • 2-3. Move & Paste Undo/Redo
  • 3. Erase
    • 3-1. How to Erase data for a specific part between ABS 0 and ABS END
    • 3-2. Undo and redo of the erase operation
    • 3-3. How to Erase data in its entirety from a specified point up to ABS END:
    • 3-4. Undo and redo of the erase operation
    • 3-5. Erasing specific data (Program erase)
• Saving and loading data
  • 1. Saving the data using DATA OUT
  • 2. Loading the data using DATA IN
  • 3. Saving the data using SCSI
  • 4. Compatibility with D-90, D-80 V2.0, DMT-8 V2.0, and DMT-8
• MIDI sync function
  • 1. MIDI clock sync system
  • 2. MTC sync/MIDI machine control system
  • 3. Multitrack system by the slave mode
  • 4. External MIDI equipment sync system by the slave mode
  • 5. Sync system with "adat" by the slave mode
  • 6. Multitrack system using a D-90 / D-80 (Ver. 2) / DMT-8 (Ver.2/VL)
• SETUP mode
  • 1. How to enter the Setup Mode
  • 2. How to set each Mode
    • 2-1. Track Swapping
    • 2-2. Time Signature Setting
    • 2-3. Tempo Setting
    • 2-4. Program Title Setting
    • 2-5. Program Delete
    • 2-6. Metronome Setting
    • 2-7. Preroll Time Setting
    • 2-8. MIDI Sync Signal Output Setting
    • 2-9. MTC Frame Rate Setting
    • 2-10. MTC Offset Time Setting
    • 2-11. MTC Offset Mode Setting
    • 2-12. Slave Mode Setting
    • 2-13. Slave Mode Type Setting
    • 2-14. Record Protect Setting
    • 2-15. Digital Input Track Setting
    • 2-16. Digital Out Track Setting
    • 2-17. Bar/Beat Resolution Mode Setting
    • 2-18. MIDI Device ID Setting
    • 2-19. Sampling Frequency Setting
    • 2-20. Event Number Check on Each Track
    • 2-21. Current Drive Setting
    • 2-22. Loading Song Data
    • 2-23. Saving Song Data
    • 2-24. Formatting IDE/SCSI disk
• MIDI Implementation Chart
• MMC Command List
• Inquiry Message List
• Fostex MIDI System Exclusive Message Format
• Maintenance
• Specifications