Fostex D-160 - Manual (Page 38)

D-160 Owner's Manual (Before operating the D-160)
38
6. Time Base
The D-160 indicates the location of the recorder (the current position) using
the ABS time, MTC, or MIDI Bar/Beat/Clock. This time reference is called "Time
Base."
ABS (Absolute Time) refers to an absolute time on the hard disk; MTC (MIDI
timecode) refers to a relative time obtained by adding a certain value (MTC
offset value) to the ABS value; and BAR/BEAT/CLK (bar/ /clock) indicates a
position in a song that corresponds to the MIDI Clock/Song Position pointer and
can be created using the internal Tempo Map. (The following diagram shows
the relationship between the three types of time base.)
○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
ABS END
DISK END
23h 59m 59s
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
ABS 0
00m, 00s, 00f
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○
00m, 08s, 00f
MTC
MTC
MTC OFFSET MODE = BAR
(THIS shall be assumed to be the
MTC OFFSET time set for the 00
BAR, 1 and 00 CLK positions.)
MTC OFFSET=01h, 00m, 00s, 00f
BAR =001BAR, "0404(4/4)"
TEMPO=001BAR, 1 "60( =60)"
BAR/ /CLK
ABS
MTC OFFSET=01h, 00m, 00s, 00f
MTC OFFSET MODE = ABS
(THIS shall be assumed to be the
MTC OFFSET time set for the ABS
00m, 00s and 00f positions.)
* Replace all symbols in the text with the quarter note symbol.
0h 59m 59s
0h 59m 51s
Non recorded area Recorded area
00h, 59m, 52s, 00sf 01h, 00m, 00s, 00sf
01h, 00m, 00s, 00f 01h, 00m, 08s, 00f
-002BAR, 1 , 00 CLK 001BAR, 1 , 00 CLK