Fostex D-160 - Manual (Page 22)

D-160 Owner's Manual (Names and Functions)
22
Pressing the STOP button will abort the editing operations and display the current
position of the recorder, if you wish to:
* quit the data edit mode,
* cancel the recall or store operation,
* quit the pitch data display,
* cancel the edit operation, such as pasting, or
* cancel the SETUP menu settings.
Pressing the foot switch while holding down this button allows you to turn the punch in/
out rehearsal mode ON/OFF.
*3 Clipboard playback:
The D-160 plays back the copy data or move data for the Clipboard. During audio playback
of the copy or move data, the FL will display the time length and data type (“Copy Clip
Play!” or “Move Clip Play!"), and the copy or move source track indicator will flash, enabling
you to quickly determine the track and data type.
*4 Locate ABS 0:
The D-160 will locate the top of the selected Program (ABS TIME: 00m: 00s: 00f).
*5 Locate ABS END:
The D-160 will locate the end of the recorded data on the Program (ABS END).
* These operations can be executed only on real tracks 1 ~ 16.
* Refer to page "32" of the "Before Operating" section for more information about ABS 0 and
ABS END.
* Refer to page "81" for more information about Punch In/Out recording using the foot switch.
36. Play button [PLAY]
Pressing this button will cause the recorder to play back.
Pressing this button while holding down the RECORD button will start recording.
Pressing this button while holding down the STOP button will perform the Clipboard
playback operation. Refer to the section “STOP Button” for more information on the
Clipboard playback.
Pressing the PLAY button during recording will stop recording.
37. Rewind button [REWIND]
Pressing this button while the recorder section is stopped will rewind data at 30 times
speed. Pressing this button in Play mode will cue data (you can hear sound while rewinding)
at five times speed.
Pressing this button while holding down the STOP button will perform the "LOCATE ABS
0" operation, and immediately locate the beginning of the Program (ABS TIME: 00m: 00s:
00f). (Refer to the "STOP button" section for more information about LOCATE ABS 0.)
38. Fast Forward button [F FWD]
Pressing this button while the recorder section is stopped will fast forward data at 30
times speed. Pressing this button in Play mode will cue data (you can hear sound during
the fast forward operation) at five times speed.
Pressing this button while holding down the STOP button will initiate the "LOCATE ABS
END" operation, and immediately locate the end of the recorded data on the Program
(ABS END). (Refer to the "STOP button" section for more information about LOCATE ABS
END.)
39. Locked LED [LOCKED]
The Locked LED will blink when the D-160 is setup as slave mode.
It will light on when the lock is achived.
* Refer to page "123" for more information about "Slave Mode Function."