D-160 owner's manual (names and functions) – Fostex D-160 User Manual
Page 31
D-160 Owner's Manual (Names and Functions)
31
SCSI device connection error: (The SCSI device is not connected correctly.)
Action to take:
Check to see if the external SCSI device is connected to the SCSI connector
correctly, or the power to the SCSI device is turned on.
Disk Lock error: (The hard disk is not installed correctly, or not securely locked by the key.)
Action to take:
Install the hard disk correctly or confirm that the disk is set properly, and be
sure to lock it using the included key.
In rare case, the "No Disk IDE" will also be displayed if the cartride connector
pins are soiled. In such a case, clean the connector pins with alcohol or its
equivalent.
When cleaning, however, be extremely careful not to generate static electricity.
SCSI save error: (Occurrence of an error during execution of save into SCSI equipment)
Action to take:
Because "Retry?" will be displayed when the EXIT/NO key is pressed, if save is to
be executed again, press the EXECUTE/YES key upon display of "Retry?."
If save is to be canceled at this stage, press the EXIT/NO key again.
9
10
11
12
13
14
15
16
8
7
6
5
4
3
2
1
42
OL
0
30
24
18
12
9
6
3
∞
_
9
10
11
12
13
14
15
16
8
7
6
5
4
3
2
1
42
OL
0
30
24
18
12
9
6
3
∞
_
9
10
11
12
13
14
15
16
8
7
6
5
4
3
2
1
42
OL
0
30
24
18
12
9
6
3
∞
_
SCSI load error: (Occurrence of an error during execution of load from SCSI equipment)
Action to take:
Because "Retry?" will be displayed when the EXIT/NO key is pressed, if loading
is to be executed again, press the EXECUTE/YES key upon display of "Retry?."
If loading is to be canceled at this stage, press the EXIT/NO key again.
9
10
11
12
13
14
15
16
8
7
6
5
4
3
2
1
42
OL
0
30
24
18
12
9
6
3
∞
_