Fostex D-160 - Manual (Page 10)

D-160 Owner's Manual (Main features of D-160)
10
* A programmable internal Tempo Map, with a selection of eleven
time signatures and a quarter note range of 30 to 250, and
Metronome function.
* REC Protect function to prevent accidental recording
* Number Of Events Monitor function that monitors the overflow
of events.
The number of created events can be displayed for each track.
* Installing an optional 8345 TC/SYNC card allows for the MTC-to-
LTC conversion and output, as well as the slave operation for
incoming LTC.
It also allows for synchronization with video reference signals
and Word Clock, as well as output of Word Clock signal to an
external digital device.
* Selectable reference time code (MTC/LTC), with six frame rates
(24/25/30ND/30DF/29.97ND/29.97DF).
* Wide selection of slave types (Vari, S/P DIF, adat, Free), 8345
clock (INT/VIDEO/WORD/AUTO), and WORD out (8345/D-160)
to support various sync environment. Eight Sync Presets available
to recall complex sync settings at once.
* The optional 5041 will add eight +4dBu, analog balanced inputs
(D-SUB25 pin x 1) and 16 outputs (D-SUB25 pin x 2) to the D-
160’s -10dBV unbalanced I/Os (RCA pin).
* Adat backup as well as conventional DAT backup supported.
Equipped with a standard SCSI interface, which allows for a high-
speed data backup to an external SCSI device.
Also, a Save Length Setting function enables backup of the
specified part of a Song.
* +/-6% Vari-pitch function for fine pitch adjustment without
significant tonal quality deterioration.
* Sixteen standard tracks, plus eight additional tracks (Tr. 17-24).
* Track Exchange function for swapping any tracks 1-24.
Track exchange of eight tracks (1-8, 9-16, 17-24) is also available.
* Detachable controller, which can be extended up to 10 meters
with two optional 8551 extension cables (5m).