Fostex D-160 - Manual (Page 92)

D-160 Owner's Manual (Edit function)
92
Entering and storing the CLIPBOARD OUT point
4. Press the RECALL key, and then the CLIPBOARD OUT key (or press only the
CLIPBOARD OUT key). The D-160 will enter the edit mode.
5. Move the cursor to the digit you wish to change the HOLD/> key or the SHUTTLE
dial, and change the value using the JOG dial.
6. After setting the value, press the STORE key, and then the CLIPBOARD OUT
key.
The time value will be stored as the Clipboard Out time, the edit mode will
disengage, and the display will return to the previous screen.
* You can select one (mono) track, multiple tracks, or all sixteen tracks.
When using the Copy & Paste or Move & Paste function, however, you can change
the paste destination track only when you have selected a mono track, or an odd-
numbered track and the adjacent even-numbered track (i.e.: 1-2, 3-4, or 13-14, 15-
16). If you have moved multiple tracks (other than the above combination), the data
will be pasted to the move source tracks. (track 1-> track 1..........track 3-> track 3 etc.)
Moving the track data after storing the CLIPBOARD IN/OUT points
7. Select the move track using the RECORD TRACK select keys (you can select
multiple tracks).
8. Press the MOVE key.
Upon finishing moving in the clipboard, "Move Clip"/"COMPLETED!" will appear
in the display and then return to the original time base display.
Now the sound data in the specified track has been moved to the Clipboard.
At this point, the move source data has yet been deleted. It will be deleted
after you perform the paste operation.
* To check the stored In/Out points, press the CLIPBOARD IN key and CLIPBOARD
OUT key respectively. The time value you just stored will be shown on the
display.
* You can perform steps 1-3 in real-time. (Pressing the STORE key, then the
CLIPBOARD IN key while playing back the recorder will store data.)
<Hints>
When you are storing the In/Out points in real-time while using the “BAR/BEAT/
CLK” Time Base, you can store them in steps of beats if the “ Resolution ?" menu
(Bar/Beat Resolution mode ON/OFF) in the Setup mode is “On.”
When this bar/beat resolution mode is “On,” the CLK value will be rounded up
or off to “00” (at the beginning of the beat) as soon as you press the STORE key.
This function is useful when you wish to use the Copy & Paste or Move & Paste
function is steps of beats. Refer to page “160” for detailed operation.