Fostex D-160 - Manual (Page 137)

D-160 Owner's manual (SETUP mode)
137
SETUP mode
The setup mode allows you to set up parameters for the D-160 according to your
requirements.
The contents that you can set up are listed below.
There are two types of setup modes. Some modes are commonly applicable to all
programs from 1 to 99 and some others are applicable to each program individually,
except for Load, Save & Format.
You can save or load those set up modes, which are applicable program by program as a
part of the song data, as we described before in the "SAVING/LOADING SONG DATA"
section. But, those which are applicable to all programs are not saved or loaded.
Nevertheless, they are memorized even if you turn off the power.
Mode Functions Community Initial Setting
"Track Exchange?" Track Swapping
_
Trk=01 <-> Trk=01
"Signature Set?" Time Signature Setting (Chosen from 11 setting from 1/4 ~ 8/8) 001 bar 04 04 (4/4 beat)
"Tempo Map Set?" Tempo Setting (30Å`250 bpm) 001 bar 1 =120 (Tempo 120)
"Title Edit?" Program Name Setting (Up to 16 digits) #0001
"Delete PGM?" Program Deleting
_
"Click ?" Metronome ON/OFF Setting Off
"Preroll Time?" Preroll Time Setting for LOCATE Function 00s (00 second)
"Midi Sync Out?" Midi Sync Out Signal Setting CLK (MIDI Clock)
"Frame Rate?" MTC Frame Rate Setting 25 Frames
"MTC OFFSET" Offset Time Setting between ABS and MTC 0h 59m 57s 00f 00sf
"MTC Offset Mode?" MTC Offset Mode Setting ABS
"Slave Mode?" Slave Mode ON/OFF Setting Off
"Ref.TC?" Available with Option Model 8345 (Refer to the Model 8345 Owners Manual)
"Slave Type?" Slave Mode Type Setting Vari
"Rec Protect?" Record Protect ON/OFF Setting Off (Record Enable)
"Digi. in?" Digital Input Track Setting L--, R-- (Nothing is assigned)
"Digi. out?" Digital Output Track Setting Adat
" Resolution?" Bar/Beat Resolution ON/OFF Setting Off
"Device ID?" MIDI Device ID Setting 00 (Device No. =00)
"Sample Rate?" Sampling Frequency Setting 44.1kHz
"8345 Clock?" Available with Option Model 8345 (Refer to the Model 8345 Owners Manual)
"Word Out?" Available with Option Model 8345 (Refer to the Model 8345 Owners Manual)
"Sync Preset?" Available with Option Model 8345 (Refer to the Model 8345 Owners Manual)
"NOs Of Event?" Event Number Check of a Track
_
"Drive Sel.?" Current Drive Setting
_
IDE (Internal Hard disk)
"Load PGM?" Loading Song Data from External Device
_
"Save PGM?" Saving Song Data to External Device
_
"Disk Format?" Initializing Internal Hard disk/SCSI disk
_
: Modes applicable program by program. They can be saved/loaded.
: Modes applicable to all programs. They cannot be saved/loaded.
The " " means a quarter note(1/4 note) through out this manual.
1. How to enter the Setup Mode
This is the procedure to arriving at the stage for choosing the other modes you
require. The procedure from now on is written assuming the required program
has already been selected. So, make sure the program you want to work on is
already selected.
1. Press the Display key and choose the flashing SETUP mode on the display.
2. Press the EXECUTE/YES key.
The SETUP display stops flashing.
This is the first step in the set up mode.
44.1kHz
SETUP
9 10 11 12 13 14 15 16 8 7 6 5 4 3 2 1
42
OL
0
30
24
18
12
9
6
3
∞
_