Fostex D-160 - Manual (Page 138)

D-160 Owner's manual (SETUP mode)
138
44.1kHz
SETUP
9 10 11 12 13 14 15 16 8 7 6 5 4 3 2 1
42
OL
0
30
24
18
12
9
6
3
∞
_
"Drive Sel. ?"
"Track Exchange ?"
"MTC OFFSET"
"Rec Protect ?"
<Note>
The setup menu will show the "Track Exchange?" mode as for the factory default setting
or just after you have formatted the internal hard disk drive. However, except for these,
the setup menu will show the last mode you chose.
3. Turn the JOG dial and choose the mode you want.
If you rotate the JOG dial either clockwise or counter clockwise, the modes appear one after the
other. Some modes also show their current settings.
When you turn the JOG dial, SETUP menus will be displayed in the following order.
As you change the menu, the position indicators in the FL tube display will also start flashing
and moving on one after another.
The position of the SETUP menu that you choose will
start flashing on the level meters. Each SETUP menu
has a dedicated position in the FL tube display.
When you change the menu with the JOG dial, the
position indicators start flashing one after another.
Use this feature as a reference to choose the SETUP
menus.
This feature also shows these four menus; "Ref.TC?",
"8345 Clock", "Word Out" and "Sync Preset". However,
since these menus will only work when the optional
accessory Model 8345 is installed, there is no
explanation of these functions in manual.
Refer to the Model 8345 owners' manual for details.
"Track Exchange?"
"Signature Set?"
Tempo Map Set?"
"TitleEdit PGM**?" (PGM01)
"Delete PGM**?"(PGM01)
"Click ?"(Off)
"PrerollTime?"(00s)
"MidiSyncOut?" (CLK)
"Frame Rate?" (25 frame)
"MTC OFFSET" (00h 59m 57s 00f 00sf)
"Offset Mode?" (ABS)
"Slave Mode?"(Off)
"Ref. TC?" (Void!)
"SlaveType?" (Vari)
"Rec Protect?" (Off)
"Digi. in?" (L--, R--)
"Digi. out?"(adat)
" Resolution?" (Off)
"Device ID?" (00)
"SampleRate?" (44.1)
"8345Clock" (Void!)
"Word Out"(Void!)
"SyncPreset"(Void!)
"NOs Of Event"
"Drive Sel. ?"(IDE)
"Load PGM?"
"Save PGM?"
"Disk Format?"