5. erasing specific data (program erase), Select pgm, Erase pgm – Fostex D-160 User Manual
Page 101: Title edit pgm, D-160 owner's manual (edit function), Press the erase key, Press the execute/yes key, D-160, 02 flash, 02 is the current program number), The message
D-160 Owner's Manual (Edit function)
101
3-5. Erasing specific data (Program erase)
Here, erase all data recorded in any program that is no longer necessary.
Unlike the "erasing the program" explained in "Recording/Playback", the program number
will remain intact and other settings will all be in the initial state same as when the New
Program was made (at completion of erase, ABS 0=ABS END).
Therefore, the tempo map setting and program title will be in the initial figures.
<Note>
Note that the UNDO/REDO function cannot be used at Program Erasing.
4
2
1
3
1. Press the STORE key while holding down the HOLD/> key.
The D-160 will enter the Program Setup mode, and display the message “Select PGM!”, and then
the current Program number and title. (The Program number and “SURE?” will flash.)
Example:
“Select PGM!”
->
“P02 [*****”
(02 flash, 02 is the current program number)
2. Turn the JOG dial to select the number of a Program you wish to erase.
The selected Program number will flash. (Can not use "New Program?.")
3. Press the ERASE key.
The message
“Erase PGM**?”
(where, ** is the selected Program number) appears on
the display, and “SURE?” will flash.
4. Press the EXECUTE/YES key.
When the erase operation is completed, the display changes to the
“Title Edit PGM**?”
menu in Setup mode, where you can name the Program from which you erased the data.
* To name the Program, follow the explanation on page "147" regarding the “2-4. Title Edit
PGM?” menu in Setup mode.
If you do not wish to name the Program, press the STOP button or the EXIT/NO key.
The display will change to the ABS indication, with the Program number unchanged.
The title of the Program is erased, and the Program will use a temporary title.
SHIFT
AUTO
CLIPBOARD PLAY
LOCATE ABS 0
DIGITAL MULTITRACK RECORDER
D-160
IN / OUT
PUNCH
PGM CHANGE
8/16
7/15
6/14
5/13
4/12
3/11
2/10
1/9
RECORD TRACK
HD ACCESS
LOCKED
MTC IN
END
IN
OUT
START
AUTO PUNCH
AUTO PLAY
IN
OUT
AUTO RTN
CLIPBOARD
PASTE
MOVE
COPY
AUTO RTN
ERASE
UNDO
REDO
DISP SEL
EXECUTE
/YES
EXIT
/NO
HOLD/
STORE
RECALL
TIME BASE SEL
TAKE
REHEARSAL
LOCATE
PUNCH
F FWD
REWIND
PLAY
STOP
RECORD
VARI PITCH
LOCATE ABS END