MITSUBISHI ELECTRIC DX-TL1600EM - Manual (Page 10)

10
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
■ How to use JOG dial and SHUTTLE ring
The JOG/SHUTTLE is used in the various Menus and for
special playback features. In the Menu process, the Jog
dial is used to navigate through the units Menus and Sub-
menus. It is also used to change the individual Menu
settings.The SHUTTLE is used to select a specific Menu
and to select the needed entry in the individual Menu set-
tings. Follow the example below to learn how to use the
JOG/SHUTTLE in a Menu application.
♦ Setting the character size
Example: Setting the CHARACTER SIZE to “LARGE” (the
default setting is “SMALL”).
1. Press the SET UP button on the front of the Unit.
• The <MENU SETTING> menu will appear.
<MENU SETTING>
@TIME DATE DISPLAY
MPX DISPLAY
TIMER PROGRAM
2. Make sure that the cursor is set to the TIME DATE DISPLAY
and turn the SHUTTLE ring to the right.
• Turning the SHUTTLE ring to the right displays the next
menu.
SHUTTLE ring
3. Turn the JOG dial to select the CHARACTER SIZE.
• Turning the JOG dial to the right moves the cursor downward.
Turning the JOG dial to the left moves the cursor upward.
JOG dial
4. Turn the SHUTTLE ring to the right to flash the sub-item.
• The sub-item “SMALL” will start flashing.
<TIME DATE DISPLAY>
DISPLAY MODE
@CHARACTER SIZE
CLOCK LOCATION
1
SMALL
OFF
While the sub-item is flashing, the menu display
will not disappear when you press the SET UP but-
ton.
5. Turn the JOG dial to change the sub-item to “LARGE”.
• The “LARGE” will start flashing.
<TIME DATE DISPLAY>
DISPLAY MODE
@CHARACTER SIZE
CLOCK LOCATION
1
LARGE
OFF
6.Turn the SHUTTLE ring to the right to enter the selection.
• The sub-item will stop flashing.
<TIME DATE DISPLAY>
DISPLAY MODE
@CHARACTER SIZE
CLOCK LOCATION
1Ł
LARGE
OFF
♦ Exiting the menu
The following explains how to exit the menu using JOG
dial and the SHUTTLE ring.
Example: Exiting the <TIME DATE DISPLAY> menu after
setting the character size.
1. Make sure that the sub-item of the selected item is not
flashing and changed correctly.
• If the sub-item is flashing, that item is not entered. See
steps 4 on the left and enter the setting.
<TIME DATE DISPLAY>
DISPLAY MODE
@CHARACTER SIZE
CLOCK LOCATION
1
LARGE
OFF
• To set additional settings or to confirm the settings, turning
the SHUTTLE ring once to the left displays the previous menu.
<MENU SETTING>
@TIME DATE DISPLAY
MPX DISPLAY
TIMER PROGRAM
2. Turn the SHUTTLE ring twice to the left .
• The display will return to the present time display.
• Pressing the MENU button which is pressed to display the
MAIN MENU also returns the menu display to the present
time display.
SEARCH COPY SET UP INFO
MENU
INFORMATION
There are 4 different types of MAIN
MENU as shown below:
1) The <MENU SETTING> menu (press the SET
UP button to display the menu).
<MENU SETTING>
@TIME DATE DISPLAY
MPX DISPLAY
TIMER PROGRAM
NORMAL REC SETTING
A-REC/M-DET SETTING
DATA CLEAR SELECTION
COMMUNICATION SETTING
REAR TERMINAL
SERVICE
INITIAL SET UP
2) The <SEARCH SELECTION> menu (press the
SEARCH button to display the menu).
<SEARCH SELECTION>
@SELECTION CAMERA NO.ALL
TIME DATE SEARCH
INDEX SEARCH
SKIP SEARCH
ALARM LIST SEARCH
JUMP TO START POINT
3) The <INFORMATION> menu (press the INFO
button to display the menu).
<INFORMATION>
@RECORDED PERIOD
CONNECTED SCSI DEVICE
<ELAPSED TIME>
MAIN 2H
ARCHIVE 0H
COPY 0H
Basic Operations