MITSUBISHI ELECTRIC DX-TL1600EM - Manual (Page 45)

45
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations
ENGLISH
1
2
3
4
<SEQUENCE>
SEQ. 1
2
3
4
CH.@ TIME 1S
1S
1S
1S
6. Turn the JOG dial to display desired length of time then turn
the SHUTTLE ring to the right to fix setting.
• Maximum of 30 seconds can be set.
1
2
3
4
<SEQUENCE>
SEQ. 1
2
3
4
CH.@ TIME10S
1S
1S
1S
7. Repeat steps 4,5 and 6 above to fix settings for other
cameras.
8. (If you wish to display SPLIT 4 between a to d) Turn the
JOG dial to move the cursor to SPLIT 4 and turn the SHUTTLE
ring to the right to choose pattern from abcd, abc, ab or a.
• The selected pattern will start flashing.
SEQ. 10
11
12
13
14
15
16
SPLIT4
SPLIT9
P
{
}
q
w
e
r
a b c d
a b
<SEQUENCE>
CH. TIME10S
10S 10S
1S
@
10S
15S
10S
10S
10S
10S
Four SPLIT 4 display switching patterns can be
selected: abcd, abc, ab, and a. Two SPLIT 9 dis-
play switching patterns can be selected: ab and a.
Camera images automatically switched in the SPLIT
4 and SPLIT 9 display modes are from the cam-
eras set in the SPLIT 9 and SPLIT 4 settings of the
<MPX DISPLAY> menu. Furthermore, by selecting
“a”, it is also possible to fix camera switching dur-
ing sequential display.
♦ Displaying the title
You can chose whether to display the channel title (TITLE
on the <CAMERA TITLE > menu) or CH number on screen.
Example: Display title on screen (the default setting is
“CH.NO”).
1. Press the SET UP button to display the <MENU SETTING>
menu.
2. Turn the JOG dial to move the cursor to MPX DISPLAY
then turn the SHUTTLE ring to the right.
• The <MPX DISPLAY> menu will appear.
3. Turn the JOG dial to move the cursor to CH.TITLE then turn
the SHUTTLE ring to the right.
• The sub-item will start flashing.
@CH.TITLE CH.NO
CAMERA TITLE
ALARM DISPLAY ON
4. Turn the JOG dial until “TITLE” flashes and turn the
SHUTTLE ring to the right to finish setting.
@CH.TITLE TITLE
CAMERA TITLE
ALARM DISPLAY ON
By turning the JOG dial, the sub-
item of CH. TITLE will be changed as follows:
TITLE CH.NO NONE
“TITLE” : captions set in the title display setting are
displayed.
“CH. NO” : only channel numbers are displayed.
“NONE” : no captions are displayed.
5. Turn the SHUTTLE ring to the left or press the SET UP
button.
♦ Camera title setting
Operation titles can be added to each of the cameras con-
nected to the unit.
In one-screen display mode, up to 16 characters
can be displayed. In SPLIT 4 MODE, the first 8 char-
acters are displayed. Titles cannot be displayed in
SPLIT 9 MODE and SPLIT 16 MODE. In addition,
displayed titles do not get recorded.
Example: Setting the Camera CH (channel) 5 .The title
will be “EXIT” .
1. Press the SET UP button to display the <MENU SETTING>
menu.
2. Move the cursor ( ) to MPX DISPLAY then turn the
SHUTTLE ring to the right.
• The <MPX DISPLAY> menu will appear.
<MPX DISPLAY>
@SCREEN SW PATTERN ALL
SPLIT 4 SCREEN SETTING
SPLIT 9 SCREEN SETTING
SPLIT 16 SCREEN SETTING
IMAGE QLTY HIGH
SEQUENCE
CH.TITLE CH.NO
CAMERA TITLE
ALARM DISPALY ON
3. Turn the JOG dial to move the cursor to CAMERA TITLE
and turn the SHUTTLE ring to the right.
<CAMERA TITLE>
CH TITLE
@Q . . . . . . . . . . . . . . . .
W . . . . . . . . . . . . . . . .
E . . . . . . . . . . . . . . . .
R . . . . . . . . . . . . . . . .
T . . . . . . . . . . . . . . . .
Y . . . . . . . . . . . . . . . .
U . . . . . . . . . . . . . . . .
I . . . . . . . . . . . . . . . .
CAMERA
NUMBER
CAMERA TITLE
The <CAMERA TITLE> menu is composed of
two screens. By rotating the JOG dial to move the
cursor from its position next to the camera number
to CH
I , the menu will automatically scroll to the
next screen.