MITSUBISHI ELECTRIC DX-TL1600EM - Manual (Page 57)

57
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations
ENGLISH
■ High-speed fast-forward/high-speed rewind
When the SHUTTLE ring is turned clockwise or counter
clockwise for over one second during STOP mode, the unit
will shift into high-speed fast-forward or high-speed rewind
mode, and an indicator will appear at the bottom left of the
monitor. “S” denotes the start point of the data stored in the
hard disk, and “E” denotes the end point. The vertical line
marks the current position.
01-01-2001 MON
00:00:00 25F 30 % C16
S E
■ Monitor display settings and playback
operation
• Single screen : The screen will change frame by frame at
a rate equal to the recording interval multiplied by the
number of cameras used in the recording.
• SPLIT 4 : Each mini-screen will change frame by frame at
a rate equal to the recording interval multiplied by the
number of cameras used in the recording. The screen dis-
play shift to still frame mode during playback from a cam-
era which is not indicated.
• SPLIT 9 : Each mini-screen will change frame by frame at
the recorded interval. The screen display shift to still frame
mode during playback from a camera which is not indi-
cated.
• SPLIT 16 : Each mini-screen will change frame by frame
at the recorded interval. The screen display shift to still frame
mode during playback from a camera which is not indi-
cated.
■ Time date search
Please refer to page 15 for detailed operation.
■ Index Search
During Alarm Recording, an index signal will automatically
be written onto the hard disk. Index Search is a process of
retrieving still frames using their associated index signal to
select the camera number.
The index count can be set, as desired, up to 99.
Example: Enter 10 for the index count, then start a search
to select the camera number
5 .
1. Press the SEARCH button to display the <SEARCH
SELECTION> menu.
<SEARCH SELECTION>
@SELECTION CAMERA NO.ALL
TIME DATE SEARCH
INDEX SEARCH
SKIP SEARCH
ALARM LIST SEARCH
JUMP TO START POINT
2. Make sure that the cursor ( ) is set to the SELECTION
CAMERA NO. menu, and turn the SHUTTLE ring to the right.
• The sub-item of SELECTION CAMERA NO. will start flashing.
Various search
<SEARCH SELECTION>
@SELECTION CAMERA NO.ALL
TIME DATE SEARCH
INDEX SEARCH
SKIP SEARCH
ALARM LIST SEARCH
JUMP TO START POINT
3. Turn the JOG dial to display 5 then turn the SHUTTLE ring
to the right.
• The flashing will stop.
<SEARCH SELECTION>
@SELECTION CAMERA NO. 5
TIME DATE SEARCH
INDEX SEARCH
SKIP SEARCH
ALARM LIST SEARCH
JUMP TO START POINT
By turn the JOG dial, the selec-
tion camera number will be changed as below :
ALL Q W E R T Y U
r e w q } { P O I
4. Turn the JOG dial to select the INDEX SEARCH, and turn
the SHUTTLE ring to the right.
• The <INDEX SEARCH> menu will appear .
<SEARCH SELECTION>
SELECTION CAMERA NO. 5
TIME DATE SEARCH
@INDEX SEARCH
SKIP SEARCH
ALARM LIST SEARCH
JUMP TO START POINT
5. Turn the JOG dial to display the desired index count, then
turn the SHUTTLE ring to the desired search direction. (Turn
right to move forward, turn left to move in reverse.)
• Index Search begins, and the images corresponding to the
set index count are displayed either on a SPLIT 16 screen if
“ALL” is selected in the SELECTION CAMERA NO. setting,
or on a single screen if an individual camera number has
been selected.
• The index count will begin blinking if the index signal has
not been recorded, i.e., the Index Search will not be executed.
Press the SEARCH button and the unit returns to normal
playback mode.
<INDEX SEARCH> 5
10
INPUT INDEX NUMBER
TURN THE SHUTTLE RING
<< OR >> TO VIEW NEXT
ALARM.
When “ALL” is selected in the setting parameter,
switching the search result display from SPLIT 16
screen to the Single screen display for a specific
camera number requires the following process. First
press the SEARCH button, then delete the
<SEARCH SELECTION> menu. Select the camera
number by pressing the Camera number buttons on
the front of this unit. The selected image will be
shown on the Single screen mode.
When using DDS tape, index searches can be
performed in the forward direction only.
Various search
Various playback functions (continued) /