MITSUBISHI ELECTRIC DX-TL1600EM - Manual (Page 80)

80
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Character Search
♦ Sample operation
1) Record characters “ABCDEF” and images simultaneously at the camera CH number 5 .
(On the RS-232C settings screen, set DELIMITER to “CR”.)
The following are the two steps required for recording characters:
1 Set the character (or characters string) to be recorded;
2 Record the selected character(s).
By using the CM command, characters which have been set once can be recorded any number of times. To record a different
character set, use the CW command.
CR means a carriage return code (0DH).
The unit received a command and executed.
The unit executed a command.
CW06,ABCDEF CR
CR CM05
CR CR RC EX
CR CR RC EX
Command from personal computer
Replied status code from unit
to a personal computer
Meaning
Sending a command for setting "ABCDEF" .
Sending a command to record set characters at the camera
CH number
5 (it is able to execute while recording).
• Set the CH. TITLE setting to “NONE” to display characters during segmented display mode.
2) Search for the scene associated with the recorded character set “ABCDEF”. (On the RS-232C settings screen, set DELIMITER
to “CR”.)
CR
Command from personal computer
Replied status code from unit
to a personal computer
Meaning
Sending a command for serching "ABCDEF" by character
search in a direction of the time being.
The unit received a command and executed.
means a carriage return code (0DH).
The unit received a command and executed.
Display characters on-screen (Playback only).
LF06,ABCDEF CR
CR CR RC EX4
CR1 CR
CR CR RC EX
3) Search for the scene associated with the recorded character set “ABCDEFG”. (On the RS-232C settings screen, set DELIMITER
to “CR”.)
By using abridged search by
✽ code, search can be made using only a specified number of characters found at the head of
recorded characters.
For the recorded characters “ABCDEFG” ,searches can be made using any of the following patterns specified for number of
character data.
Example of commands : LF02,A
✽ / LF03,AB ✽ / LF04,ABC ✽ / LF05,ABCD ✽ / LF06,ABCDE ✽ / LF07,ABCDEF ✽
CR
Command from personal computer
Replied status code from unit
to a personal computer
Meaning
Sending a command for serching "ABC ✽ " by abridged
search by ✽ code in a direction of the time being.
The unit received a command and executed.
means a carriage return code (0DH).
The unit received a command and executed.
Display characters on-screen (Playback only).
LF04,ABC ✽ CR
CR CR RC EX4
CR1 CR
CR CR RC EX
• Character searches can only be performed during stop, pause, and playback modes.
• The unit will fast forward or rewind until it finds the character string, then shift into still frame mode.
• If the unit does not find the character string, it will stop automatically.
• When there are multiple instances of the same character string, repeat character search if the retrieved image is not the
desired image.
• Character searches may be time-consuming as the process involves searching through all the data.
• Forward searching is the only option available when using a DDS device for playback.
Character Search (continued)