MITSUBISHI ELECTRIC DX-TL1600EM - Manual (Page 43)

43
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations
ENGLISH
3. Turn the JOG dial to move the cursor to SPLIT 4 SCREEN
SETTING then turn the SHUTTLE ring to the right.
• The <SPLIT4 SCREEN SETTING> menu will appear.
@SPLIT4 a SPLIT4 b
SPLIT4 c SPLIT4 d
Q W
E R
T Y
U I
O P
{ }
q w
e r
<SPLIT4 SCREEN SETTING>
4. Make sure that the cursor is next to “SPLIT4a”. Turn the
SHUTTLE ring to the right.
5. Check that the top left number (default setting is set to 1 ) is
flashing. Turn the JOG dial to display the desired camera
number then turn the SHUTTLE ring to the right to fix setting.
• The flashing will move to the next camera number.
@SPLIT4 a SPLIT4 b
SPLIT4 c SPLIT4 d
Q W
E R
T Y
U I
O P
{ }
q w
e r
<SPLIT4 SCREEN SETTING>
6. Set all camera numbers according to the steps written on
the previous page.
@SPLIT4 a SPLIT4 b
SPLIT4 c SPLIT4 d
W T
O I
Q Y
U }
w E
{ r
P q
e R
<SPLIT4 SCREEN SETTING>
7. Check that all camera numbers are set .Turn the SHUTTLE
ring to the right to fix setting.
• The flashing will stop.
• Settings cannot be made when the same camera number is
in SPLIT 4 SCREEN setting mode. (Possible if using a different
SPLIT4 operation) When the same camera has been selected,
the blinking light will return to its original state even if all the
camera numbers have been input. Check to see if the same
camera number has been entered; if the same number has
been entered, please change the settings.
8. Press the SET UP button.
• The <SPLIT4 SCREEN SETTING> menu will disappear.
♦ SPLIT 9 SCREEN setting
Example: Displaying desired camera pictures with desired
layout in SPLIT 9 SCREEN.
1. Press the SET UP button to display the <MENU SETTING>
menu.
2. Turn the JOG dial to move the cursor to MPX DISPLAY and
turn the SHUTTLE ring to the right.
• The <MPX DISPLAY> menu will appear.
3. Turn the JOG dial to move the cursor to SPLIT 9 SCREEN
SETTING then turn the SHUTTLE ring to the right.
• The <SPLIT9 SCREEN SETTING> menu will appear.
@SPLIT9 a SPLIT9 b
Q W E
R T Y
U I O Q W P
{ } q
w e r
<SPLIT9 SCREEN SETTING>
■ Multiplexer display
♦ SCREEN SW PATTERN settings
In this steps, the screen switch pattern is set.
Example: Setting the screen switch pattern to “SHORT” (the
default setting is “ALL”).
1. Press the SET UP button to display the <MENU SETTING>
menu.
2. Turn the JOG dial to move the cursor to MPX DISPLAY and
turn the SHUTTLE ring to the right.
• The <MPX DISPLAY> menu will appear.
<MPX DISPLAY>
@SCREEN SW PATTERN ALL
SPLIT 4 SCREEN SETTING
SPLIT 9 SCREEN SETTING
SPLIT 16 SCREEN SETTING
IMAGE QLTY HIGH
SEQUENCE
CH.TITLE CH.NO
CAMERA TITLE
ALARM DISPALY ON
3. Check that the cursor is next to the SCREEN SW PATTERN
and turn the SHUTTLE ring to the right.
• The sub-item will start flashing.
<MPX DISPLAY>
@SCREEN SW PATTERN ALL
SPLIT 4 SCREEN SETTING
SPLIT 9 SCREEN SETTING
SPLIT 16 SCREEN SETTING
IMAGE QLTY HIGH
4. Turn the JOG dial to display SHORT then turn the SHUTTLE
ring to the right.
• The sub-item stops flashing.
<MPX DISPLAY>
@SCREEN SW PATTERN SHORT
SPLIT 4 SCREEN SETTING
SPLIT 9 SCREEN SETTING
SPLIT 16 SCREEN SETTING
IMAGE QLTY HIGH
“ALL” : using this setting, all the display modes and
sequential display modes for SPLIT9, SPLIT4, and
single screens can be selected.
“SHORT” : using this setting, single screen sequen-
tial, SPLIT4, SPLIT9 sequential and SPLIT16 dis-
plays can be selected. By combining SEQUENCE
with the split-screen display setting, a fixed split-
screen display pattern can be established. Please
note that, in this case, only single screen and
SPLIT16 can be selected during playback.
5. Turn the SHUTTLE ring to the left or press the SET UP
button.
♦ SPLIT 4 SCREEN setting
SPLIT 4 SCREEN setting mode, you can choose between
a to d of SPLIT 4 display mode. Before you choose the
setting, arrange the camera position as you like in this sec-
tion.
1. Press the SET UP button to display the <MENU SETTING>
menu.
2. Turn the JOG dial to move the cursor to MPX DISPLAY and
turn the SHUTTLE ring to the right.
• The <MPX DISPLAY> menu will appear.