MITSUBISHI ELECTRIC DX-TL1600EM - Manual (Page 55)

ENGLISH
55
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations
■ Series Recording
By connecting multiple units as show in the chart below
and selecting REC•STANDBY in the HDD Repeat Record-
ing setting, this unit can perform Series Recording. In Se-
ries Recording, when the first unit’s hard disk has become
full, the second unit automatically begins recording.
System configuration (using two units)
REC ALARM-OUT POWER OFF POWER ON MODE-OUT CALL OUT GND CALL OUT DC 5V OUT MAX 30mA CLOCK ADJUST REC POWER ON POWER OFF ALARM OUT MODE OUT CALL OUT CALL OUT GND
First Unit Second Unit
GND GND GND GND GND
1
INFORMATION
In this example, when the first unit’s
hard disk reaches its maximum storage capacity,
the second unit will begin recording; when the sec-
ond unit’s hard disk reaches its maximum storage
capacity, the first unit will begin recording by over-
writing its hard disk. If you do not want the first unit
to begin the over-writing process, then please you
don’t connect the connection
1 .
INFORMATION
Through use of the CALL OUT ter-
minal, settings can be made so that a second unit
begins recording in the event that something goes
wrong with the recorder and it cannot continue re-
cording.
REC ALARM-OUT POWER OFF POWER ON MODE-OUT CALL OUT GND CALL OUT DC 5V OUT MAX 30mA CLOCK ADJUST REC POWER ON POWER OFF ALARM OUT MODE OUT CALL OUT CALL OUT GND
First Unit Second Unit
GND GND GND GND GND
Operation of
unit #1
Operation of
unit #2
Recording
Recording
Something goes wrong with the recorder
♦ Series Recording menu settings (for both units)
1. Press the SET UP button to display the <MENU SETTING>
menu.
2. Turn the JOG dial to move the cursor to the REAR TERMINAL
then turn the SHUTTLE ring to the right.
<REAR TERMINAL>
@MODE OUT
CAPACITY REMAIN
REC
HDD-10 %
3. Turn the JOG dial to move the cursor to CAPACITY REMAIN
then turn the SHUTTLE ring to the right.
• The sub-item will start flashing.
<REAR TERMINAL>
MODE OUT
@CAPACITY REMAIN
REC
HDD-10 %
4. Check that the “HDD” is flashing. Turn the SHUTTLE ring to
the right.
• Choose the HDD so that the second unit begins recording
when the first unit’s hard disk approaches its storage limit.
• The flashing will move to capacity setting.
<REAR TERMINAL>
MODE OUT
@CAPACITY REMAIN
REC
HDD-10 %
5. Turn the JOG dial till desired capacity remain appears and
then turn the SHUTTLE ring to the right.
• The sub-item will stop flashing.
<REAR TERMINAL>
MODE OUT
@CAPACITY REMAIN
REC
HDD-10 %
6. Turn the JOG dial to move the cursor to MODE OUT and
turn the SHUTTLE ring to the right.
• The sub-item will start flashing.
<REAR TERMINAL>
@MODE OUT
CAPACITY REMAIN
REC
HDD-10 %
7. Turn the JOG dial to flash “REMAIN”and turn the SHUTTLE
ring to the right.
• The sub-item will stop flashing.
<REAR TERMINAL>
@MODE OUT
CAPACITY REMAIN
REMAIN
HDD-10 %
8. Display the <INITIAL SET UP> menu.
• Press the SET UP button to display the <MENU SETTING>
menu. Move the cursor to INITIAL SET UP and turn the
SHUTTLE ring to the right.
<INITIAL SET UP>
@TIME DATE ADJUST
HDD FULL
HDD PB REPEAT
ARCHIVE OVERWRITE
AUTO EJECT
ARCHIVE DATA
STOP
STOP
OFF
ON
ALL
9. Turn the JOG dial to move the cursor to HDD FULL and
turn the SHUTTLE ring to the right.
• The sub-item will start flashing.
<INITIAL SET UP>
TIME DATE ADJUST
@HDD FULL
HDD PB REPEAT
ARCHIVE OVERWRITE
AUTO EJECT
ARCHIVE DATA
STOP
STOP
OFF
ON
ALL
10. Turn the JOG dial to display REC•STANDBY and turn the
SHUTTLE ring to the right.
• The sub-item will stop flashing.
<INITIAL SET UP>
TIME DATE ADJUST
@HDD FULL
HDD PB REPEAT
ARCHIVE OVERWRITE
AUTO EJECT
ARCHIVE DATA
REC•STANDBY
STOP
OFF
ON
ALL
11. Turn the SHUTTLE ring to the left or press the SET UP
button.
♦ Operation during Series Recording
When the storage capacity of the first unit’s HDD reaches
a pre-specified level, the second unit will begin recording.
Conversely, when the second unit’s HDD capacity reaches
a pre-specified level, the first unit will begin recording.
Through this exchange, recording will continue uninter-
rupted.
Operation of
unit #1
Operation of
unit #2
Recording
Recording
Recording
Overlapping period Overlapping period