MITSUBISHI ELECTRIC DX-TL1600EM - Manual (Page 6)

6
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Major operations and their functions
TIMER REC POWER
REC
ARCHIVE
STOP
RESET
WARNING
SEARCH COPY SET UP
MENU
INFO PAUSE REV PLAY PLAY
PLAY MODE
CLEAR/
REW
ENTER/
FF
JOG SHUTTLE
MAIN
COPY
ARCHIVE
PLAY DEVICE
EJECT
SHUTTLE
HOLD
MODE MODE
REC
SPLIT/SEQUENCE 10 9 8 11 12 13 14 15 16 7 1 3 2 6 5 4
ZOOM
0
DIGITAL RECORDER DX-TL1600E
TIMER REC M-DET PRE ALARM REC
REMOTE CONNECT RECEIVE SEND
ACCESS LOCK
COM - +
Multplex
& Record
Digital
3 4 7 8 11 1213 14 15
17 19
1 2 5 6 9 10
16 18
1. POWER button
Press to turn the power on, press again to turn the
power off. This button lights/goes off when the power
is on/off. It flashes when switching between functions
such as during setup. While the POWER button is
flashing, all button related functions will not work.
2. TIMER REC button
This button is pressed when a timer recording is to
be made. Press again to cancel timer recording.
3. COM (COMMUNICATION) button
Please press this button to make the communication
settings. Use a ballpoint pen or a similar instrument.
The settings can be cancelled by pressing the button
one more time. Also, please note that the RS-232C
setting located on the back of the unit will not function
when the communication setting button is pressed.
COMMUNICATION indicator
REMOTE indicator
Illuminates while the recorder is engaged in data
communication.
CONNECT indicator
Illuminates when connection to an external commu-
nication device has been established.
RECEIVE indicator
Illuminates when the unit is receiving a signal.
SEND indicator
Illuminates when the unit is transmitting a signal.
4. MODE indicators
ACCESS indicator
Illuminates during access to hard disk drive or pe-
ripheral recording devices.
■ Front View
LOCK indicator
Illuminates when the LOCK button is set to “ON”.
5. LOCK button
Press this button to lock the unit front panel. When
pressed with a ball point pen or similar object, keeps
the operation buttons from functioning and locks the
unit in the current mode. Release the lock by press-
ing the LOCK button again. This button also can be
used for PASSWORD LOCK function. Refer to page
64
for details. This function will not work when power
is off. In addition, this function can only be used until
the password lock function is set. Once the pass-
word lock function has been set, the SIMPLE LOCK
FUNCTION becomes inoperative.
6. Recording indicators
TIMER REC indicator
Illuminates during timer recording and timer record-
ing stand-by mode. The POWER button will not work
while the TIMER REC indicator is illuminating. To turn
on the power while the TIMER REC indicator is illu-
minating, press the TIMER REC button to cancel the
timer recording stand-by mode and then press the
POWER button.
M-DET indicator
Illuminates when the MOTION DETECTION is ac-
tive mode.
PRE ALARM REC indicator
Illuminate during pre-alarm recording and pre-alarm
recording stand-by mode.
7. MENU buttons
Press one of the buttons to display its associated
menu. Press again to exit the menu.